—SOLD— Vans RV-6A kit —SOLD—

NEW PRICE !!

– Complete kit

– Eggenfellner Engine

– All tools

 

The side-by-side RV-6 and its cousin, the tricycle gear RV-6A were introduced in 1986 and soon became the best-selling kit aircraft to date.

While Van’s no longer offers RV-6/6A Empennage Kits, Van’s continues to supply the needed parts to thousands of builders who are finishing RV-6/6As. New ones still fly with regularity.

Soon after the RV-4 proved that a two seat RV was a practical and exciting airplane, prospective customers began asking for a side-by-side RV.

When the demand became too big to ignore, Vans Aircraft went back to the drafting board. Initially, they were reluctant, because they felt that a wider, and inevitably heavier, airplane would suffer in comparison to the sleek centerline seating airplanes. It wasn’t long before their quest for optimization surfaced again. Using what they had learned from the RV-3 and RV-4, and striving in every way Vans knew to avoid losing performance and designed the RV-6.

Vans made it 43 inches wide and gave it a generous baggage compartment behind the seats. The wing on the RV-4 worked so well that there was no point in changing it. The canopy was a forward opening bubble that closed almost seamlessly and, like all RVs, the visibility is superb.

The builder of this particular kit passed away and the heirs wish to sell the kit and all tools to a builder who is able to finish the kit in the way he would have wanted it to be finished. Quality and craftsmanship were extremely important values during the construction of this aircraft.

  • 3D-view
  • IMG_2437
  • IMG_2742
  • IMG_2797
  • IMG_2953
  • IMG_3057
  • IMG_3184
  • IMG_3193

Specifications:

Type: Vans RV-6A Kit
Aircraft Registration: Not registered
Manufacturer Serial Number: 25684
Maximum Take-Off Mass: 726 kg
Year of Manufacturing: 2007
Total Time on Airframe: 0
Engines: 1x Eggenfellner E-6 Engine, serial 2008-U19650
Engine Power: 200 hp
Total Time on Engines: 0
Propellers: MT MTV-18C/183-59b, 3 bladed electrically adjustable Constant Speed Propeller
Total Time on Propellers: 0
Avionics:

SS VHF Antenna 45 degree
Garmin GNS 430 NAV/COM/GPS (8.33 compliant)
Garmin GTX-328 Mode-S Transponder
Garmin GMA-340 Audio panel/ MKR Beacon Receiver
Garmin SL-40 VHF COM
COM Antenna
Wingtip NAV antenna kit
Ameri-King blind altitude encoder AK-350
Duplexer

2x MGL avionics Stratomaster Enigma
Rdac XD (Remote Data Aquisition Computer)
2x Stratomaster SP2 magnetometer
2x Stratomaster SP4 attitude indicator

Flowscan fuel flow

Interior:

See pictures

Exterior:

See pictures

Options:

Even though Eggenfellner no longer supports the Eggenfellner/Subaru engine (Subaru converted car engine), it is included in the sale. Buyer may decide to continue to use it or change to another engine type.

An MT 3 bladed electrically fully adjustable CS propeller is included in the sale.

All tools required to build an Aluminium kit aircraft are included in the sale, They include a wide range of pneumatic tools such as drills and riveting tools.

Other items include:

Wire unshielded 18ga white and black
True airspeed - indicated airspeed indicator
2x Dynon capacitance to voltage converters
2x datcon water temperature sender 1/8 npt
UMA pressure sender 1EU100G
1/8" 100# pressure sender
2x datcon oil temperature sender 1/8 npt
MGL avionics floscan 201A-6 30GPH
3x plain dural knob control 5'
2x Gold Standard Servo (Roll & Pitch )(altitude hold system)
6x EGT Probes
3x Ferrites
Parking brake valve
Parking brake install kit
Static air kit
20.000 Altimeter (non TSO'd)

Price: SOLD
  • 3D-view
  • IMG_2437
  • IMG_2742
  • IMG_2797
  • IMG_2953
  • IMG_3057
  • IMG_3184
  • IMG_3193